Thu, 30 Oct 2025 10:40:47 +0000 <![CDATA[Nieuwste producten van iCarsoft EU | Order Online]]> https://www.icarsoft.eu/ <![CDATA[iCarsoft CR Eagle]]> iCarsoft CR Eagle offers technicians a professional and powerful diagnostic tool to accurately diagnose complex problems. With multi-brand vehicle coverage for more than 40 vehicle manufacturers CR Eagle enables you to perform full ECU diagnosis for most vehicle brands. Read and clear DTC from all available systems. Display live data in text, graph or analog for easy data review. Perform service functions and use actuation test / bi-directory test to access vehicle-specific subsystem and component tests. 
 


Current Vehicle Coverage iCarsoft CR Eagle

Acura | Alfa Romeo | Audi | BMW | Chrysler | Citroën | Dacia | Daewoo | Fiat | Ford | GM | Holden | Honda | Hyundai | Infiniti | Isuzu | Jaguar | Kia | LandRover | Lexus | Mazda | Mercedes-Benz | Mini | Mitsubishi | Nissan | Opel | Peugeot | Porsche | Renault | Saab | Scion | Seat | Skoda | Smart | Subaru | Suzuki | Toyota | Vauxhall | Volkswagen | Volvo

ICARSOFT CR EAGLE COMES WITH FREE SOFTWARE UPDATES!


ICARSOFT CR MAX BASIC OBDII FUNCTION

Read Codes | Read generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) permanent and pending Diagnostic Trouble Codes.
Erase Codes | Erase generic and manufacturer specific Diagnostic Trouble Codes. 
Determine MIL | Turn off Check Engine Light (MIL) after clearing codes and reset monitors.
DataStream | Read live PCM DataStream. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
Freeze Frame Data | When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
I/M Readiness Test | Indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
O2 Sensor Test | This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
Evap System Test | The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
Battery test | Allows you getting the voltage of battery when the engine starts.
On-Board Monitoring | This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
Vehicle Information | Displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the vehicle. 
Comprehensive Help | Including OBD Parameter, Mode Explanations, DTC search & More.

iCarsoft CR Eagle OBDII Function supports most of the OBDII/EOBD test modes including CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
iCarsoft CR Eagle OBDII Function works on most of 2001 and later OBDII compliant PETROL vehicles and most of 2004 and later OBDII compliant DIESEL vehicles. 


ICARSOFT CR EAGLE FEATURES FOR VEHICLE MAKES LISTED

Acura | Alfa Romeo | Audi | BMW | Chrysler | Citroën | Dacia | Daewoo | Fiat | Ford | GM | Holden | Honda | Hyundai | Infiniti | Isuzu | Jaguar | Kia | LandRover | Lexus | Mazda | Mercedes-Benz | Mini | Mitsubishi | Nissan | Opel | Peugeot | Porsche | Renault | Saab | Scion | Seat | Skoda | Smart | Subaru | Suzuki | Toyota | Vauxhall | Volkswagen | Volvo

Read and clear trouble codes | On most of the electronic systems such as engine, transmission, ABS, airbag etc.
Support OBDII/EOBD | (Ten Modes of Operation)
Full ECU Diagnosis
Oil Light / Service Reset (OIL)
Electronic Parking Brake (EPB) | System maintenance, deactivate and reactivate the EPB system for replacement and initialization.
Battery Management System (BMS) | Register new battery to the BMS while battery replacement.
Diesel Particulate Filter (DPF) | Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
ABS Bleeding (BLD) | Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
Airbag (ABR) | Crash data reset.
Electronic Throttle Control system (ETC) | Relearn the throttle va value while clear or replace the throttle valve.
Steering Angle Sensor (SAS) | Calibrate the steering wheel to straight ahead, or recalibrate SAS while steering part replacement.
Fuel Pump activation (FPP) | Activate it when replace a new one.
Air Filter (AFS) | Self-learning process after replacing the air filter.
Body Stability (BSC) | Function supports routine maintenance of modules, for example reset or delete the adaptation values and start-up the unit.
Engine (ECM) | Function supports routine maintenance of engine modules, for example reset or delete the adaptation values and calculate fuel consumption.
Trans adaption (TCM) | Function supports routine maintenance of transmission modules, for example reset adaptation values and adjust the oil level.
Air Suspension (SPS) | Reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off
ACS (Air Conditioner) | Function supports routine maintenance of air condition modules. Air conditioning system adaption reset, rese air conditioning compressor, run in air conditioning compressor, stepper motor initialization.
Head Lamp (LAP) | Maintenance and other related operations (Including AFS setting), and then perform this function for calibration.
Tyre Pressure Monitor System (TPMS) | Function include displaying sensor IDs from the vehicle`s ECU, inputting TPMS sensor replacement lD and testing sensors.
Engine ldle correction (IDL) | Can be executed when the idle speed fault is resolved. Adjust the engine speed of the car at idle speed.
Adaption function | Allows you to perform adaptive learning / reset / calibration and other functions for each control module. It includes some important module data for parameter adjustment such as Remote Control Adaptation.
Injector coding (INJ) | relearn the injector control parameter while the injector renewed or replaced.
Actuation Test / Bidirectory Test | Used to access vehicle-specific subsystem and component tests.
Special Functions | Seat, door window, roof etc.: Relevant functions for calibration after repairing or replacing.

Applies to most models which equipped with OBDII-16 DLC.
Certain functions may be limited from the vehicle manufacturer due to therequirement of a special factory access code.
The iCarsoft CR Eagle covers over 20 years of models, some functions may not beavailable on all years / models.


ICARSOFT CR EAGLE CONTENTS

  • iCarsoft CR EAGLE Professional Tablet
  • VCI + Cable
  • Power Adaptor
  • 4 TPMS Sensors
  • USB cable
  • Professional carry case
  • Videoscope with accessories
  • 5 OBD Connection Adaptors
  • Cleaning Cloth, Quick Guide & User Manual
]]> Mon, 24 Mar 2025 12:44:26 +0000 <![CDATA[iCarsoft CR Max BT]]> iCarsoft CR Max BT offers technicians a professional and powerful diagnostic tool to accurately diagnose complex problems. With multi-brand vehicle coverage for more than 40 vehicle manufacturers CR MAX enables you to perform full ECU diagnosis for most vehicle brands. Read and clear DTC from all available systems. Display live data in text, graph or analog for easy data review. Perform service functions and use actuation test / bi-directory test to access vehicle-specific subsystem and component tests. 

MAX vehicle makes, MAX systems and MAX powerfull!


Current Vehicle Coverage iCarsoft CR Max BT

Acura | Alfa Romeo | Audi | BMW | Chrysler | Citroën | Dacia | Daewoo | Fiat | Ford | GM | Holden | Honda | Hyundai | Infiniti | Isuzu | Jaguar | Kia | LandRover | Lexus | Mazda | Mercedes-Benz | Mini | Mitsubishi | Nissan | Opel | Peugeot | Porsche | Renault | Saab | Scion | Seat | Skoda | Smart | Subaru | Suzuki | Toyota | Vauxhall | Volkswagen | Volvo

ICARSOFT CR MAX BT COMES WITH FREE SOFTWARE UPDATES!


ICARSOFT CR MAX BT BASIC OBDII FUNCTION

Read Codes | Read generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) permanent and pending Diagnostic Trouble Codes.
Erase Codes | Erase generic and manufacturer specific Diagnostic Trouble Codes. 
Determine MIL | Turn off Check Engine Light (MIL) after clearing codes and reset monitors.
DataStream | Read live PCM DataStream. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
Freeze Frame Data | When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
I/M Readiness Test | Indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
O2 Sensor Test | This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
Evap System Test | The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
Battery test | Allows you getting the voltage of battery when the engine starts.
On-Board Monitoring | This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
Vehicle Information | Displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the vehicle. 
Comprehensive Help | Including OBD Parameter, Mode Explanations, DTC search & More.

iCarsoft CR MAX BT OBDII Function supports most of the OBDII/EOBD test modes including CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
iCarsoft CR MAX BT OBDII Function works on most of 2001 and later OBDII compliant PETROL vehicles and most of 2004 and later OBDII compliant DIESEL vehicles. 


ICARSOFT CR MAX BT FEATURES FOR VEHICLE MAKES LISTED

Acura | Alfa Romeo | Audi | BMW | Chrysler | Citroën | Dacia | Daewoo | Fiat | Ford | GM | Holden | Honda | Hyundai | Infiniti | Isuzu | Jaguar | Kia | LandRover | Lexus | Mazda | Mercedes-Benz | Mini | Mitsubishi | Nissan | Opel | Peugeot | Porsche | Renault | Saab | Scion | Seat | Skoda | Smart | Subaru | Suzuki | Toyota | Vauxhall | Volkswagen | Volvo

Read and clear trouble codes | On most of the electronic systems such as engine, transmission, ABS, airbag etc.
Support OBDII/EOBD | (Ten Modes of Operation)
Full ECU Diagnosis
Oil Light / Service Reset (OIL)
Electronic Parking Brake (EPB) | System maintenance, deactivate and reactivate the EPB system for replacement and initialization.
Battery Management System (BMS) | Register new battery to the BMS while battery replacement.
Diesel Particulate Filter (DPF) | Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
ABS Bleeding (BLD) | Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
Airbag (ABR) | Crash data reset.
Electronic Throttle Control system (ETC) | Relearn the throttle va value while clear or replace the throttle valve.
Steering Angle Sensor (SAS) | Calibrate the steering wheel to straight ahead, or recalibrate SAS while steering part replacement.
Fuel Pump activation (FPP) | Activate it when replace a new one.
Air Filter (AFS) | Self-learning process after replacing the air filter.
Body Stability (BSC) | Function supports routine maintenance of modules, for example reset or delete the adaptation values and start-up the unit.
Engine (ECM) | Function supports routine maintenance of engine modules, for example reset or delete the adaptation values and calculate fuel consumption.
Trans adaption (TCM) | Function supports routine maintenance of transmission modules, for example reset adaptation values and adjust the oil level.
Air Suspension (SPS) | Reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off
ACS (Air Conditioner) | Function supports routine maintenance of air condition modules. Air conditioning system adaption reset, rese air conditioning compressor, run in air conditioning compressor, stepper motor initialization.
Head Lamp (LAP) | Maintenance and other related operations (Including AFS setting), and then perform this function for calibration.
Tyre Pressure Monitor System (TPMS) | Function include displaying sensor IDs from the vehicle`s ECU, inputting TPMS sensor replacement lD and testing sensors.
Engine ldle correction (IDL) | Can be executed when the idle speed fault is resolved. Adjust the engine speed of the car at idle speed.
Adaption function | Allows you to perform adaptive learning / reset / calibration and other functions for each control module. It includes some important module data for parameter adjustment such as Remote Control Adaptation.
Injector coding (INJ) | relearn the injector control parameter while the injector renewed or replaced.
Actuation Test / Bidirectory Test | Used to access vehicle-specific subsystem and component tests.
Special Functions | Seat, door window, roof etc.: Relevant functions for calibration after repairing or replacing.

Applies to most models which equipped with OBDII-16 DLC.
Certain functions may be limited from the vehicle manufacturer due to therequirement of a special factory access code.
The iCarsoft CR Max BT covers over 20 years of models, some functions may not beavailable on all years / models.


ICARSOFT CR MAX BT CONTENTS

  • iCarsoft CR MAX BT Professional Tablet
  • Power Brick
  • User manual
  • PC Connecting cable
  • Professional carry case
  • Wireless VCI
]]> Tue, 13 Aug 2024 13:23:05 +0000 <![CDATA[iCarsoft VDSP2000 Inspection Camera]]>
It’s a perfect partner for iCarsoft tablet diagnostic tool CR MAX and CR MAX BT.

With its fluid resistant 5.5mm head and LED illumination, dark and fluid soaked areas are no longer a problem.]]> Mon, 05 Aug 2024 08:18:41 +0000 <![CDATA[Main Cable iCarsoft ]]> Thu, 01 Jun 2023 13:26:49 +0000 <![CDATA[iCarsoft JP V3.0]]>
iCarsoft JP V3.0 supports multiple languages: English, German, Spanish, French, Dutch, Danish, Italian, Hungarian, Norwegian, Portuguese, Finnish, Swedish, Czech and Russian.
 

ICARSOFT JP V3.0 SUPER ADVANTAGES

  1. Diagnose Single Brand of most Models (OBDII-16DLC)
  2. Full System Diagnosis
  3. Read &Clear DTC          
  4. Read Live Data
  5. Activation Test
  6. Oil Service Reset
  7. Electronic Parking Brake (EPB) system maintenance
  8. Battery Management System (BMS)
  9. Diesel Particulate Filter (DPF) Regeneration Control System
  10. Electronic Throttle Control System (ETC)
  11. Steering Angle Sensor (SAS) Calibration
  12. Battery Test    
  13. Injector Coding
  14. Adaption
  15. Air Suspenison 
  16. Data Review and Print
  17. Full Speed Upgrade via PC
  18. 4.0″ TFT LCD, 480*320 Pixels          

ICARSOFT JP V3.0 FEATURES FOR ASIAN CAR BRANDS

Read and clear trouble codes | On most of the electronic systems such as engine, transmission, ABS, airbag etc.
Support OBDII/EOBD | (Ten Modes of Operation)
Full ECU Diagnosis
Oil Light / Service Reset
Electronic Parking Brake (EPB) | System maintenance, deactivate and reactivate the EPB system for replacement and initialization.
Battery Management System (BMS) | Register new battery to the BMS while battery replacement.
Diesel Particulate Filter (DPF) | Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
ABS Bleeding | Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
Electronic Throttle Control system (ETC) | Relearn the throttle va value while clear or replace the throttle valve.
Steering Angle Sensor (SAS) | Calibrate the steering wheel to straight ahead, or recalibrate SAS while steering part replacement.
Fuel Pump activation | Activate it when replace a new one.
Air Filter | Self-learning process after replacing the air filter.
Body Stability (BCM) | Function supports routine maintenance of DSC modules, for example reset or delete the adaptation values and start-up the unit.
Engine (ECM) | Function supports routine maintenance of engine modules, for example reset or delete the adaptation values and calculate fuel consumption.
Trans adaption (TCM) | Function supports routine maintenance of transmission modules, for example reset adaptation values and adjust the oil level.
Air Suspension | Reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off
ACS (Air Conditioner) | Function supports routine maintenance of air condition modules. Air conditioning system adaption reset, rese air conditioning compressor, run in air conditioning compressor, stepper motor initialization.
Head Lamp | Maintenance and other related operations (Including AFS setting), and then perform this function for calibration.
TPMS | Function include displaying sensor IDs from the vehicle`s ECU, inputting TPMS sensor replacement lD and testing sensors.
Engine ldle correction | Can be executed when the idle speed fault is resolved. Adjust the engine speed of the car at idle speed.
Adaption function | Allows you to perform adaptive learning / reset / calibration and other functions for each control module. It includes some important module data for parameter adjustment such as Remote Control Adaptation.
Injector coding | relearn the injector control parameter while the injector renewed or replaced.
Actuation Test / Bidirectory Test | Used to access vehicle-specific subsystem and component tests.

Applies to most of the models which equipped with OBDII-16 DLC.
Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code.
The iCarsoft JP V3.0 scanner covers over 20 years of models, some functions may not beavailable on all years / models.
 

ICARSOFT JP V3.0 OBDII FUNCTION FOR ALL CAR BRANDS

OBDII Function for all OBDII cars, not only for Asian car brands

Read Codes | Read generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) permanent and pending Diagnostic Trouble Codes.
Erase Codes | Erase generic and manufacturer specific Diagnostic Trouble Codes. 
Determine MIL | Turn off Check Engine Light (MIL) after clearing codes and reset monitors.
DataStream | Read live PCM DataStream. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
Freeze Frame Data | When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
I/M Readiness Test | Indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
O2 Sensor Test | This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
Evap System Test | The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
Battery test | Allows you getting the voltage of battery when the engine starts.
On-Board Monitoring | This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
Vehicle Information | Displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the vehicle. 
Comprehensive Help | Including OBD Parameter, Mode Explanations, DTC search & More.

iCarsoft JP V3.0 OBDII Function supports most of the OBDII/EOBD test modes including CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
iCarsoft JP V3.0 OBDII Function works on most of 2001 and later European OBDII compliant PETROL vehicles and most of 2004 and later European OBDII compliant DIESEL vehicles.

ICARSOFT JP V3.0 CONTENTS

  • iCarsoft JP V3.0 scantool
  • TF card with diagnostic software for Toyota, Lexus, Scion, Isuzu, Nissan, Infiniti, Mitsubishi, Honda, Acura, Mazda and Subaru.
  • OBDII cable
  • User manual
  • PC connecting cable
  • Nylon carry case
]]> Mon, 06 Feb 2023 09:15:23 +0000 <![CDATA[iCarsoft EU Max]]> iCarsoft EU Max offers technicians a professional and powerful diagnostic tool to accurately diagnose complex problems. With multi-brand vehicle coverage for European vehicle manufacturers EU MAX enables you to perform full ECU diagnosis for most European vehicle brands. Read and clear DTC from all available systems. Display live data in text, graph or analog for easy data review. Perform service functions and use actuation test / bi-directory test to access vehicle-specific subsystem and component tests. 


Current Vehicle Coverage iCarsoft EU MAX

European manufacturers: Alfa Romeo / Audi / BMW / Citroën / Dacia / Fiat / Ford EU /  Jaguar / Lancia / LandRover /  Mercedes-Benz / Mini / Opel / Peugeot / Porsche / Renault / Saab / Seat / Skoda / Smart / Vauxhall / Volkswagen / Volvo

ICARSOFT EU MAX COMES WITH FREE SOFTWARE UPDATES!


ICARSOFT EU MAX BASIC OBDII FUNCTION

Read Codes | Read generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) permanent and pending Diagnostic Trouble Codes.
Erase Codes | Erase generic and manufacturer specific Diagnostic Trouble Codes. 
Determine MIL | Turn off Check Engine Light (MIL) after clearing codes and reset monitors.
DataStream | Read live PCM DataStream. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
Freeze Frame Data | When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
I/M Readiness Test | Indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
O2 Sensor Test | This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
Evap System Test | The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
Battery test | Allows you getting the voltage of battery when the engine starts.
On-Board Monitoring | This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
Vehicle Information | Displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the vehicle. 
Comprehensive Help | Including OBD Parameter, Mode Explanations, DTC search & More.

iCarsoft EU MAX OBDII Function supports most of the OBDII/EOBD test modes including CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
iCarsoft EU MAX OBDII Function works on most of 2001 and later European OBDII compliant PETROL vehicles and most of 2004 and later European OBDII compliant DIESEL vehicles. 


ICARSOFT EU MAX FEATURES FOR VEHICLE MAKES LISTED

European manufacturers: Alfa Romeo / Audi / BMW / Citroën / Dacia / Fiat / Ford EU / GM / Holden / Jaguar / Lancia / LandRover /  Mercedes-Benz / Mini / Opel / Peugeot / Porsche / Renault / Saab / Seat / Skoda / Smart / Vauxhall / Volkswagen / Volvo

Read and clear trouble codes | On most of the electronic systems such as engine, transmission, ABS, airbag etc.
Support OBDII/EOBD | (Ten Modes of Operation)
Full ECU Diagnosis
Oil Light / Service Reset (OIL)
Electronic Parking Brake (EPB) | System maintenance, deactivate and reactivate the EPB system for replacement and initialization.
Battery Management System (BMS) | Register new battery to the BMS while battery replacement.
Diesel Particulate Filter (DPF) | Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
ABS Bleeding (BLD) | Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
Airbag (ABR) | Crash data reset.
Electronic Throttle Control system (ETC) | Relearn the throttle va value while clear or replace the throttle valve.
Steering Angle Sensor (SAS) | Calibrate the steering wheel to straight ahead, or recalibrate SAS while steering part replacement.
Fuel Pump activation (FPP) | Activate it when replace a new one.
Air Filter (AFS) | Self-learning process after replacing the air filter.
Body Stability (BSC) | Function supports routine maintenance of modules, for example reset or delete the adaptation values and start-up the unit.
Engine (ECM) | Function supports routine maintenance of engine modules, for example reset or delete the adaptation values and calculate fuel consumption.
Trans adaption (TCM) | Function supports routine maintenance of transmission modules, for example reset adaptation values and adjust the oil level.
Air Suspension (SPS) | Reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off
ACS (Air Conditioner) | Function supports routine maintenance of air condition modules. Air conditioning system adaption reset, rese air conditioning compressor, run in air conditioning compressor, stepper motor initialization.
Head Lamp (LAP) | Maintenance and other related operations (Including AFS setting), and then perform this function for calibration.
Tyre Pressure Monitor System (TPMS) | Function include displaying sensor IDs from the vehicle`s ECU, inputting TPMS sensor replacement lD and testing sensors.
Engine ldle correction (IDL) | Can be executed when the idle speed fault is resolved. Adjust the engine speed of the car at idle speed.
Adaption function | Allows you to perform adaptive learning / reset / calibration and other functions for each control module. It includes some important module data for parameter adjustment such as Remote Control Adaptation.
Injector coding (INJ) | relearn the injector control parameter while the injector renewed or replaced.
Actuation Test / Bidirectory Test | Used to access vehicle-specific subsystem and component tests.
Special Functions | Seat, door window, roof etc.: Relevant functions for calibration after repairing or replacing.

Applies to most models which equipped with OBDII-16 DLC.
Certain functions may be limited from the vehicle manufacturer due to therequirement of a special factory access code.
The iCarsoft EU MAX covers over 20 years of models, some functions may not beavailable on all years / models.


ICARSOFT EU MAX CONTENTS

  • iCarsoft EU MAX Scanner
  • OBDII main cable
  • Users manual
  • PC Connecting cable
  • Professional carry case
]]> Mon, 06 Feb 2023 09:08:39 +0000 <![CDATA[iCarsoft OP V3.0]]>
iCarsoft OP V3.0 supports multiple languages: English, German, Spanish, French, Dutch, Danish, Italian, Hungarian, Norwegian, Portuguese, Finnish, Swedish, Czech and Russian.
 

ICARSOFT OP V3.0 SUPER ADVANTAGES

  1. Diagnose Single Brand of most Models (OBDII-16DLC)
  2. Full System Diagnosis
  3. Read &Clear DTC          
  4. Read Live Data
  5. Activation Test
  6. Oil Service Reset
  7. Electronic Parking Brake (EPB) system maintenance
  8. Battery Management System (BMS)
  9. Diesel Particulate Filter (DPF) Regeneration Control System
  10. Electronic Throttle Control System (ETC)
  11. Steering Angle Sensor (SAS) Calibration
  12. Battery Test    
  13. Injector Coding
  14. Adaption
  15. Air Suspenison 
  16. Data Review and Print
  17. Full Speed Upgrade via PC
  18. 4.0″ TFT LCD, 480*320 Pixels          

ICARSOFT OP V3.0 FEATURES FOR OPEL AND VAUXHALL

Read and clear trouble codes | On most of the electronic systems such as engine, transmission, ABS, airbag etc.
Support OBDII/EOBD | (Ten Modes of Operation)
Full ECU Diagnosis
Oil Light / Service Reset
Electronic Parking Brake (EPB) | System maintenance, deactivate and reactivate the EPB system for replacement and initialization.
Battery Management System (BMS) | Register new battery to the BMS while battery replacement.
Diesel Particulate Filter (DPF) | Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
ABS Bleeding | Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
Electronic Throttle Control system (ETC) | Relearn the throttle va value while clear or replace the throttle valve.
Steering Angle Sensor (SAS) | Calibrate the steering wheel to straight ahead, or recalibrate SAS while steering part replacement.
Fuel Pump activation | Activate it when replace a new one.
Air Filter | Self-learning process after replacing the air filter.
Body Stability (BCM) | Function supports routine maintenance of DSC modules, for example reset or delete the adaptation values and start-up the unit.
Engine (ECM) | Function supports routine maintenance of engine modules, for example reset or delete the adaptation values and calculate fuel consumption.
Trans adaption (TCM) | Function supports routine maintenance of transmission modules, for example reset adaptation values and adjust the oil level.
Air Suspension | Reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off
ACS (Air Conditioner) | Function supports routine maintenance of air condition modules. Air conditioning system adaption reset, rese air conditioning compressor, run in air conditioning compressor, stepper motor initialization.
Head Lamp | Maintenance and other related operations (Including AFS setting), and then perform this function for calibration.
TPMS | Function include displaying sensor IDs from the vehicle`s ECU, inputting TPMS sensor replacement lD and testing sensors.
Engine ldle correction | Can be executed when the idle speed fault is resolved. Adjust the engine speed of the car at idle speed.
Adaption function | Allows you to perform adaptive learning / reset / calibration and other functions for each control module. It includes some important module data for parameter adjustment such as Remote Control Adaptation.
Injector coding | relearn the injector control parameter while the injector renewed or replaced.
Actuation Test / Bidirectory Test | Used to access vehicle-specific subsystem and component tests.

Applies to most of the models which equipped with OBDII-16 DLC.
Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code.
The iCarsoft OP V3.0 scanner covers over 20 years of models, some functions may not beavailable on all years / models.
 

ICARSOFT OP V3.0 OBDII FUNCTION FOR ALL CAR BRANDS

OBDII Function for all OBDII cars, not only for Opel and Vauxhall

Read Codes | Read generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) permanent and pending Diagnostic Trouble Codes.
Erase Codes | Erase generic and manufacturer specific Diagnostic Trouble Codes. 
Determine MIL | Turn off Check Engine Light (MIL) after clearing codes and reset monitors.
DataStream | Read live PCM DataStream. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
Freeze Frame Data | When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
I/M Readiness Test | Indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
O2 Sensor Test | This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
Evap System Test | The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
Battery test | Allows you getting the voltage of battery when the engine starts.
On-Board Monitoring | This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
Vehicle Information | Displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the vehicle. 
Comprehensive Help | Including OBD Parameter, Mode Explanations, DTC search & More.

iCarsoft OP V3.0 OBDII Function supports most of the OBDII/EOBD test modes including CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
iCarsoft OP V3.0 OBDII Function works on most of 2001 and later European OBDII compliant PETROL vehicles and most of 2004 and later European OBDII compliant DIESEL vehicles.

ICARSOFT OP V3.0 CONTENTS

  • iCarsoft OP V3.0 scantool
  • TF card with diagnostic software for Opel and Vauxhall.
  • OBDII cable
  • User manual
  • PC connecting cable
  • Nylon carry case
]]> Mon, 06 Feb 2023 08:49:39 +0000 <![CDATA[iCarsoft US V3.0]]>
iCarsoft US V3.0 supports multiple languages: English, German, Spanish, French, Dutch, Danish, Italian, Hungarian, Norwegian, Portuguese, Finnish, Swedish, Czech and Russian.
 

ICARSOFT US V3.0 SUPER ADVANTAGES

  1. Diagnose Single Brand of most Models (OBDII-16DLC)
  2. Full System Diagnosis
  3. Read &Clear DTC          
  4. Read Live Data
  5. Activation Test
  6. Oil Service Reset
  7. Electronic Parking Brake (EPB) system maintenance
  8. Battery Management System (BMS)
  9. Diesel Particulate Filter (DPF) Regeneration Control System
  10. Electronic Throttle Control System (ETC)
  11. Steering Angle Sensor (SAS) Calibration
  12. Battery Test    
  13. Injector Coding
  14. Adaption
  15. Air Suspenison 
  16. Data Review and Print
  17. Full Speed Upgrade via PC
  18. 4.0″ TFT LCD, 480*320 Pixels          

ICARSOFT US V3.0 FEATURES FOR FORD-US, GM, CHRYSLER AND JEEP

Read and clear trouble codes | On most of the electronic systems such as engine, transmission, ABS, airbag etc.
Support OBDII/EOBD | (Ten Modes of Operation)
Full ECU Diagnosis
Oil Light / Service Reset
Electronic Parking Brake (EPB) | System maintenance, deactivate and reactivate the EPB system for replacement and initialization.
Battery Management System (BMS) | Register new battery to the BMS while battery replacement.
Diesel Particulate Filter (DPF) | Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
ABS Bleeding | Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
Electronic Throttle Control system (ETC) | Relearn the throttle va value while clear or replace the throttle valve.
Steering Angle Sensor (SAS) | Calibrate the steering wheel to straight ahead, or recalibrate SAS while steering part replacement.
Fuel Pump activation | Activate it when replace a new one.
Air Filter | Self-learning process after replacing the air filter.
Body Stability (BCM) | Function supports routine maintenance of DSC modules, for example reset or delete the adaptation values and start-up the unit.
Engine (ECM) | Function supports routine maintenance of engine modules, for example reset or delete the adaptation values and calculate fuel consumption.
Trans adaption (TCM) | Function supports routine maintenance of transmission modules, for example reset adaptation values and adjust the oil level.
Air Suspension | Reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off
ACS (Air Conditioner) | Function supports routine maintenance of air condition modules. Air conditioning system adaption reset, rese air conditioning compressor, run in air conditioning compressor, stepper motor initialization.
Head Lamp | Maintenance and other related operations (Including AFS setting), and then perform this function for calibration.
TPMS | Function include displaying sensor IDs from the vehicle`s ECU, inputting TPMS sensor replacement lD and testing sensors.
Engine ldle correction | Can be executed when the idle speed fault is resolved. Adjust the engine speed of the car at idle speed.
Adaption function | Allows you to perform adaptive learning / reset / calibration and other functions for each control module. It includes some important module data for parameter adjustment such as Remote Control Adaptation.
Injector coding | relearn the injector control parameter while the injector renewed or replaced.
Actuation Test / Bidirectory Test | Used to access vehicle-specific subsystem and component tests.

Applies to most of the models which equipped with OBDII-16 DLC.
Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code.
The iCarsoft US V3.0 scanner covers over 20 years of models, some functions may not beavailable on all years / models.
 

ICARSOFT US V3.0 OBDII FUNCTION FOR ALL CAR BRANDS

OBDII Function for all OBDII cars, not only for Ford-US, General Motors, Chrysler and Jeep

Read Codes | Read generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) permanent and pending Diagnostic Trouble Codes.
Erase Codes | Erase generic and manufacturer specific Diagnostic Trouble Codes. 
Determine MIL | Turn off Check Engine Light (MIL) after clearing codes and reset monitors.
DataStream | Read live PCM DataStream. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
Freeze Frame Data | When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
I/M Readiness Test | Indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
O2 Sensor Test | This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
Evap System Test | The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
Battery test | Allows you getting the voltage of battery when the engine starts.
On-Board Monitoring | This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
Vehicle Information | Displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the vehicle. 
Comprehensive Help | Including OBD Parameter, Mode Explanations, DTC search & More.

iCarsoft US V3.0 OBDII Function supports most of the OBDII/EOBD test modes including CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
iCarsoft US V3.0 OBDII Function works on most of 2001 and later European OBDII compliant PETROL vehicles and most of 2004 and later European OBDII compliant DIESEL vehicles.

ICARSOFT US V3.0 CONTENTS

  • iCarsoft US V3.0 scantool
  • TF card with diagnostic software for Ford-US, General Motors, Chrysler and Jeep.
  • OBDII cable
  • User manual
  • PC connecting cable
  • Nylon carry case
]]> Mon, 27 Jun 2022 13:03:36 +0000 <![CDATA[iCarsoft BENZ 38-PIN OBDII adapter]]> Wed, 18 May 2022 08:16:05 +0000 <![CDATA[iCarsoft BMW 20-PIN OBDII adapter]]> Wed, 18 May 2022 08:10:29 +0000 <![CDATA[iCarsoft CR Genius]]> ICARSOFT CR GENIUS SUMMARY

Tool information

  • 5-inch LCD display (1280x720 resolution)
  • Physical button operation
  • Touch Screen operation
  • WIFI connectivity
  • Software updates directly on device
  • Feedback to iCarsoft engineers directly on device
  • Multi-language: English, German, French, Spanish and Dutch

Diagnosis

  • Full OBDII/EOBD function
  • Read ECU (Electronic Control Unit) inormation from all systems
  • Read and Clear DTC (Diagnostic Trouble Codes) from all systems
  • Read Live Data
  • Read and Clear Freeze Frame
  • Battery Voltage Test
  • Auto VIN vehicle detection

Service Functions

  • Actuation/Bi-directional test
  • OIL | Oil Reset Service
  • EPB | Electronic Parking Brake Service
  • BMS | Battery Management System Service
  • ETC | Electronic Throttle Control Service
  • SAS | Steering Angle Sensor Calibration Service
  • DPF | Diesel Particulate Filter Service
  • BLD | ABS Bleeding Service
  • INJ | Injector Coding Service
  • TPMS | Tyre Pressure Monitor System Service





 

ICARSOFT CR GENIUS VEHICLE COVERGE

Professional diagnostic tool iCarsoft CR Genius covers more than 40 vehicle makes.
 
Acura - Alfa Romeo - Audi - BMW - Chrysler - Citroën - Dacia - Daewoo - Fiat - Ford (AU, EU and US) - General Motors - Holden - Honda - Hyundai - Infinity - Isuzu - Jaguar - Kia - Lancia - Land Rover - Lexus - Mazda - Mercedes Benz (incl. Sprinter) - MINI - Mitsubishi - Nissan - Opel - Peugeot - Porsche - Renault - Saab - Scion - Seat - Skoda - Smart - Subaru - Suzuki - Toyota - Vauxhall - Volkswagen - Volvo

OBDII/EOBD DIAGNOSIS

iCarsoft CR Genius is equipped with diagnostic software for more than 40 car brands. The software supports models from 1996 and newer and communicates with ALL AVAILABLE ECU'S to provide a complete report of the car's status. CR Genius READS DTC'S to help you determine why the warning light is on. CLEAR DTC'S and TURN OFF THE CHECK ENGINE LIGHT. When needed, this powerfull diagnostic tool displays LIVE DATA in text, colour graph or analog for easy review of the PCM datastream. When a faultcode occurs, certain vehicle condition are recorded and labeled as FREEZE FRAME DATA, you can read and clear this data. iCarsoft CR Genius performs some special tests, such as I/M READINESS TEST, O2 SENSOR TEST, EVAP SYSTEM TEST and BATTERY TEST. Use AUTO VIN to automatically identify model and year information in no time. Auto VIN is not supported for all cars, if not supported select the vehicle information manualy.

SERVICE FUNCTIONS

Oil Light / Service Reset
Electronic Parking Brake (EPB) | System maintenance, deactivate and reactivate the EPB system for replacement and initialization.
Battery Management System (BMS) | Register new battery to the BMS while battery replacement.
Diesel Particulate Filter (DPF) | Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
ABS Bleeding | Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
Electronic Throttle Control system (ETC) | Relearn the throttle va value while clear or replace the throttle valve.
Steering Angle Sensor (SAS) | Calibrate the steering wheel to straight ahead, or recalibrate SAS while steering part replacement.
Injector coding | relearn the injector control parameter while the injector renewed or replaced.
TPMS | Function include displaying sensor IDs from the vehicle`s ECU, inputting TPMS sensor replacement lD and testing sensors.
Actuation Test / Bidirectory Test | Used to access vehicle-specific subsystem and component tests.

ICARSOFT CR GENIUS CONTENTS

* CR Genius diagnostic tool
* OBDII/EOBD cable
* USB-cable
* Power adapter
* User Manual
* Instructions
 
Optional adapters:
 
* Sprinter 14 PIN adapter
]]> Tue, 17 May 2022 10:59:07 +0000 <![CDATA[iCarsoft FR V3.0]]>
iCarsoft FR V3.0 supports multiple languages: English, German, Spanish, French, Dutch, Danish, Italian, Hungarian, Norwegian, Portuguese, Finnish, Swedish, Czech and Russian.
 

ICARSOFT FR V3.0 SUPER ADVANTAGES

  1. Diagnose Single Brand of most Models (OBDII-16DLC)
  2. Full System Diagnosis
  3. Read &Clear DTC          
  4. Read Live Data
  5. Activation Test
  6. Oil Service Reset
  7. Electronic Parking Brake (EPB) system maintenance
  8. Battery Management System (BMS)
  9. Diesel Particulate Filter (DPF) Regeneration Control System
  10. Electronic Throttle Control System (ETC)
  11. Steering Angle Sensor (SAS) Calibration
  12. Battery Test    
  13. Injector Coding
  14. Adaption
  15. Air Suspenison 
  16. Data Review and Print
  17. Full Speed Upgrade via PC
  18. 4.0″ TFT LCD, 480*320 Pixels          

ICARSOFT FR V3.0 FEATURES FOR ALFA ROMEO, CITROEN, DACIA, FIAT, PEUGEOT AND RENAULT

Read and clear trouble codes | On most of the electronic systems such as engine, transmission, ABS, airbag etc.
Support OBDII/EOBD | (Ten Modes of Operation)
Full ECU Diagnosis
Oil Light / Service Reset
Electronic Parking Brake (EPB) | System maintenance, deactivate and reactivate the EPB system for replacement and initialization.
Battery Management System (BMS) | Register new battery to the BMS while battery replacement.
Diesel Particulate Filter (DPF) | Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
ABS Bleeding | Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
Electronic Throttle Control system (ETC) | Relearn the throttle va value while clear or replace the throttle valve.
Steering Angle Sensor (SAS) | Calibrate the steering wheel to straight ahead, or recalibrate SAS while steering part replacement.
Fuel Pump activation | Activate it when replace a new one.
Air Filter | Self-learning process after replacing the air filter.
Body Stability (BCM) | Function supports routine maintenance of DSC modules, for example reset or delete the adaptation values and start-up the unit.
Engine (ECM) | Function supports routine maintenance of engine modules, for example reset or delete the adaptation values and calculate fuel consumption.
Trans adaption (TCM) | Function supports routine maintenance of transmission modules, for example reset adaptation values and adjust the oil level.
Air Suspension | Reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off
ACS (Air Conditioner) | Function supports routine maintenance of air condition modules. Air conditioning system adaption reset, rese air conditioning compressor, run in air conditioning compressor, stepper motor initialization.
Head Lamp | Maintenance and other related operations (Including AFS setting), and then perform this function for calibration.
TPMS | Function include displaying sensor IDs from the vehicle`s ECU, inputting TPMS sensor replacement lD and testing sensors.
Engine ldle correction | Can be executed when the idle speed fault is resolved. Adjust the engine speed of the car at idle speed.
Adaption function | Allows you to perform adaptive learning / reset / calibration and other functions for each control module. It includes some important module data for parameter adjustment such as Remote Control Adaptation.
Injector coding | relearn the injector control parameter while the injector renewed or replaced.
Actuation Test / Bidirectory Test | Used to access vehicle-specific subsystem and component tests.

Applies to most of the models which equipped with OBDII-16 DLC.
Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code.
The iCarsoft FR V3.0 scanner covers over 20 years of models, some functions may not beavailable on all years / models.
 

Coverage for Alfa Romeo

Diagnostics Alfa Romeo
Airbag Reset Alfa Romeo
Air Conditioner Alfa Romeo
Bleeding function Alfa Romeo
Battery Management System Alfa Romeo
Diesel Particle Filter Alfa Romeo
Electroninc Throttle Control Alfa Romeo
Injector Alfa Romeo
Lamps Alfa Romeo
Oil Service Alfa Romeo
Steering Angle Sensor Alfa Romeo
SPS Accelerometer Alfa Romeo
Tyre Preasure Management Alfa Romeo
 

Coverage for Citroën

Diagnostics Citroën
Bleeding function Citroën
Battery Management System Citroën
Diesel Particle Filter Citroën
Electronic Parking Brake Citroën
Electroninc Throttle Control Citroën
Injector Citroën
Oil Service Citroën
Steering Angle Sensor Citroën




 

Coverage for Dacia

Diagnostics Dacia
Bleeding function Dacia
Battery Management System Dacia
Diesel Particle Filter Dacia
Electroninc Throttle Control Dacia
Injector Dacia
Oil Service Dacia
Steering Angle Sensor Dacia





 

Coverage for Fiat

Diagnostics Fiat
Airbag Reset Fiat
Air Conditioner Fiat
Bleeding function Fiat
Battery Management System Fiat
Diesel Particle Filter Fiat
Electronic Parking Brake Fiat
Electroninc Throttle Control Fiat
Injector Fiat
Lamps Fiat
Oil Service Fiat
Steering Angle Sensor Fiat
Tyre Preasure Management Fiat
 

Coverage for Peugeot

Diagnostics Peugeot
Bleeding function Peugeot
Battery Management System Peugeot
Diesel Particle Filter Peugeot
Electronic Parking Brake Peugeot
Electroninc Throttle Control Peugeot
Injector Peugeot
Oil Service Peugeot
Steering Angle Sensor Peugeot




 

Coverage for Renault

Diagnostics Renault
Bleeding function Renault
Battery Management System Renault
Diesel Particle Filter Renault
Electronic Parking Brake Renault
Electroninc Throttle Control Renault
Injector Renault
Oil Service Renault
Steering Angle Sensor Renault
Tyre Preasure Management Renault



 

ICARSOFT FR V3.0 OBDII FUNCTION FOR ALL CAR BRANDS

OBDII Function for all OBDII cars, not only for Alfa Romeo, Citroen, Dacia, Fiat, Peugeot and Renault

Read Codes | Read generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) permanent and pending Diagnostic Trouble Codes.
Erase Codes | Erase generic and manufacturer specific Diagnostic Trouble Codes. 
Determine MIL | Turn off Check Engine Light (MIL) after clearing codes and reset monitors.
DataStream | Read live PCM DataStream. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
Freeze Frame Data | When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
I/M Readiness Test | Indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
O2 Sensor Test | This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
Evap System Test | The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
Battery test | Allows you getting the voltage of battery when the engine starts.
On-Board Monitoring | This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
Vehicle Information | Displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the vehicle. 
Comprehensive Help | Including OBD Parameter, Mode Explanations, DTC search & More.

iCarsoft FR V3.0 OBDII Function supports most of the OBDII/EOBD test modes including CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
iCarsoft FR V3.0 OBDII Function works on most of 2001 and later European OBDII compliant PETROL vehicles and most of 2004 and later European OBDII compliant DIESEL vehicles.

ICARSOFT FR V3.0 CONTENTS

  • iCarsoft FR V3.0 scantool
  • TF card with diagnostic software for Abarth, Alfa Romeo,
    Citroen, Dacia, Lancia, Fiat, Peugeot and Renault
  • OBDII cable
  • User manual
  • PC connecting cable
  • Nylon carry case
]]> Fri, 13 May 2022 11:18:05 +0000 <![CDATA[iCarsoft CR Ultra]]> iCarsoft CR Ultra iCarsoft proudly presents the iCarsoft CR Ultra, an advanced automotive diagnostic tool with 10-inch touchscreen tablet. It offers over 30 special service functions, supports ECU coding, programming, active test and more. Diagnose, research and manage any issue at fingertip. The fully optimized easy-to-use software allows advanced OE-level disgnostics, online ECU coding, complete bi-directional functions, access to all vehicle modules, etc.

iCarsoft CR ULTRA comes with a 3 YEAR FREE UPDATES license!

ICARSOFT CR ULTRA VEHICLE COVERAGE


European manufacturers: Abarth / Alfa Romeo / Audi / Bentley / BMW / Bugatti / Citroën / Dacia / Ferrari / Fiat / Ford EU / GAZ / IZH / Jaguar / Lamborghini / Lancia / LandRover /  Maserati / Maybach \ Mercedes-Benz / Mini / Opel / PAZ / Peugeot / Porsche / Renault / Rolls Royce / Rover / Saab / Seat / SEAZ / Skoda / Smart / UAZ / Vauxhall / VAZ / Volkswagen / Volvo / ZAZ
Asian manufacturers: Acura / Daewoo /  Daihatsu / Honda / Hyundai | / Infiniti / Isuzu / Kia / Lexus / Mazda / Mitsubishi / Nissan / Scion / Ssangyong / Subaru / Suzuki / Toyota
American manufacturers: Buick / BX-Fiat / BX-GM / Cadillac / Chevrolet / Chrysler / Dodge / Ford US / GM / Hummer / Jeep / Lincoln
Australian manufacturers: Ford AUS / Holden

Automatic software upgrade!
ICARSOFT CR ULTRA OE-LEVEL WIRELESS INTELLIGENT DIAGNOSTICS
Adaption | Calibration | Coding | Initialization | Matching | Relearning | Resetting

ICARSOFT CR ULTRA FEATURES

1. Comprehensive OBD relearn coverage.
2. Onscreen relearn procedure.
3. Read &clear codes for all available systems.
4. Display live data in text, graph & analog for easy data review.
5. Auto VIN technology can automatically identify model and year information in no time.
6. Actuation test / Bi-directory test is used to access vehicle-specific subsystem and component tests.
7. Steering Angle Sensor (SAS) calibration: Calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
8. Oil Light/Service Reset: Support service lamp reset, reset service mileage and service intervals.
9. Electronic Parking Brake (EPB): System maintenance deactivates and reactivates the EPB system for replacement and initialization.
10. Diesel Particulate Filter (DPF): Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
11. Battery Management System (BMS): Registers new battery to the BMS while battery replacement.
12. Electronic Throttle Control system (ETC): Relearns the throttle valve control value while clear or replaces the throttle value.
13. ABS Bleeding: Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
14. Injector coding: Relearn the injector control parameter while the injector renewed or replaced.
15. Support TPMS programming service: It allows you to look up the tire sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
16. AFS Head Lamp reset means that the adaptive front lighting system can be rotated to either side, pressing the button means they stay pointing straight forward, and don't turn anymore when turning the steering wheel.
17. Air Suspension: Try reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off.
18. Gearbox Reset: Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.
19. Air conditioning service: Calibration of air-conditioning related control units, such as additional calibration of air mass flow, etc.
20. Air Filter Self-learning process after replacing the air filter.
21. Fuel Pump activation function, activate it when replace a new one.
22. ODO Reset, this function allow you to revise the date of odometer and write the original date into new odometer.
23. Seat Match, this utility performs the re-initialization of the power seat adaptive memory.
24. Windows/Door/Roof, when replacing door glass and after battery replacement on certain year, make, model vehicles special steps need to be taken in order to properly replace and reprogram the vehicle so the electric windows work properly , the door window glass position can be learned by executing this routine, which enables pinch protection and one touch up function.
25. Supports ADblue Reset, Stop/Start Reset, Tyre Reset, Nox Sensor Reset, Gear Learning and more.
26. Automatic software upgrade.
27. Easy to feedback test questions online.
28. Provides convenient instruction with customer in interface.
29. Language Change, this routine is to change language displayed in the instrument display.
30. Multi-language: English, German, Dutch, Spanish, French, Italian, Japanese, Portuguese, Russian, Polish, Turkish, Hungarian, Chinese. (More languages will be added in the future.)

Note!
Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code.
This tool covers 20 years models, so some functions may not be available on all years /models.

PRODUCT SPECIFICATIONS

Operating System | Android 10.0
CPU | 2.0GHz Quad-core
Display | 10" Touch Screen (1280*800 Resolution)
RAM | 4GB
ROM | 64GB
Connectivity | Wi-Fi, WL AN (802. 11b/g/n) /Bluetooth 5.0
Camera | 8.0MP Rear-Facing Camera with AF
Built-in Battery | 6000mAh
Audio Output | Built-in Speakers
Input Voltage | DC 5V/2.5A
Working Temperature | 0℃~50℃(32~122℉)
Storage Temperature | -20℃~60℃(-4~ 140℉)

ICARSOFT CR ULTRA CONTENTS

]]> Mon, 13 Sep 2021 09:25:44 +0000 <![CDATA[iCarsoft CR Max ]]> iCarsoft CR Max offers technicians a professional and powerful diagnostic tool to accurately diagnose complex problems. With multi-brand vehicle coverage for more than 40 vehicle manufacturers CR MAX enables you to perform full ECU diagnosis for most vehicle brands. Read and clear DTC from all available systems. Display live data in text, graph or analog for easy data review. Perform service functions and use actuation test / bi-directory test to access vehicle-specific subsystem and component tests. 

MAX vehicle makes, MAX systems and MAX powerfull!


Current Vehicle Coverage iCarsoft CR Max

Acura | Alfa Romeo | Audi | BMW | Chrysler | Citroën | Dacia | Daewoo | Fiat | Ford | GM | Holden | Honda | Hyundai | Infiniti | Isuzu | Jaguar | Kia | LandRover | Lexus | Mazda | Mercedes-Benz | Mini | Mitsubishi | Nissan | Opel | Peugeot | Porsche | Renault | Saab | Scion | Seat | Skoda | Smart | Subaru | Suzuki | Toyota | Vauxhall | Volkswagen | Volvo

ICARSOFT CR MAX COMES WITH FREE SOFTWARE UPDATES!


ICARSOFT CR MAX BASIC OBDII FUNCTION

Read Codes | Read generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) permanent and pending Diagnostic Trouble Codes.
Erase Codes | Erase generic and manufacturer specific Diagnostic Trouble Codes. 
Determine MIL | Turn off Check Engine Light (MIL) after clearing codes and reset monitors.
DataStream | Read live PCM DataStream. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
Freeze Frame Data | When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
I/M Readiness Test | Indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
O2 Sensor Test | This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
Evap System Test | The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
Battery test | Allows you getting the voltage of battery when the engine starts.
On-Board Monitoring | This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
Vehicle Information | Displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the vehicle. 
Comprehensive Help | Including OBD Parameter, Mode Explanations, DTC search & More.

iCarsoft CR MAX OBDII Function supports most of the OBDII/EOBD test modes including CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
iCarsoft CR MAX OBDII Function works on most of 2001 and later OBDII compliant PETROL vehicles and most of 2004 and later OBDII compliant DIESEL vehicles. 


ICARSOFT CR MAX FEATURES FOR VEHICLE MAKES LISTED

Acura | Alfa Romeo | Audi | BMW | Chrysler | Citroën | Dacia | Daewoo | Fiat | Ford | GM | Holden | Honda | Hyundai | Infiniti | Isuzu | Jaguar | Kia | LandRover | Lexus | Mazda | Mercedes-Benz | Mini | Mitsubishi | Nissan | Opel | Peugeot | Porsche | Renault | Saab | Scion | Seat | Skoda | Smart | Subaru | Suzuki | Toyota | Vauxhall | Volkswagen | Volvo

Read and clear trouble codes | On most of the electronic systems such as engine, transmission, ABS, airbag etc.
Support OBDII/EOBD | (Ten Modes of Operation)
Full ECU Diagnosis
Oil Light / Service Reset (OIL)
Electronic Parking Brake (EPB) | System maintenance, deactivate and reactivate the EPB system for replacement and initialization.
Battery Management System (BMS) | Register new battery to the BMS while battery replacement.
Diesel Particulate Filter (DPF) | Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
ABS Bleeding (BLD) | Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
Airbag (ABR) | Crash data reset.
Electronic Throttle Control system (ETC) | Relearn the throttle va value while clear or replace the throttle valve.
Steering Angle Sensor (SAS) | Calibrate the steering wheel to straight ahead, or recalibrate SAS while steering part replacement.
Fuel Pump activation (FPP) | Activate it when replace a new one.
Air Filter (AFS) | Self-learning process after replacing the air filter.
Body Stability (BSC) | Function supports routine maintenance of modules, for example reset or delete the adaptation values and start-up the unit.
Engine (ECM) | Function supports routine maintenance of engine modules, for example reset or delete the adaptation values and calculate fuel consumption.
Trans adaption (TCM) | Function supports routine maintenance of transmission modules, for example reset adaptation values and adjust the oil level.
Air Suspension (SPS) | Reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off
ACS (Air Conditioner) | Function supports routine maintenance of air condition modules. Air conditioning system adaption reset, rese air conditioning compressor, run in air conditioning compressor, stepper motor initialization.
Head Lamp (LAP) | Maintenance and other related operations (Including AFS setting), and then perform this function for calibration.
Tyre Pressure Monitor System (TPMS) | Function include displaying sensor IDs from the vehicle`s ECU, inputting TPMS sensor replacement lD and testing sensors.
Engine ldle correction (IDL) | Can be executed when the idle speed fault is resolved. Adjust the engine speed of the car at idle speed.
Adaption function | Allows you to perform adaptive learning / reset / calibration and other functions for each control module. It includes some important module data for parameter adjustment such as Remote Control Adaptation.
Injector coding (INJ) | relearn the injector control parameter while the injector renewed or replaced.
Actuation Test / Bidirectory Test | Used to access vehicle-specific subsystem and component tests.
Special Functions | Seat, door window, roof etc.: Relevant functions for calibration after repairing or replacing.

Applies to most models which equipped with OBDII-16 DLC.
Certain functions may be limited from the vehicle manufacturer due to therequirement of a special factory access code.
The iCarsoft cr Max covers over 20 years of models, some functions may not beavailable on all years / models.


ICARSOFT CR Max CONTENTS

  • iCarsoft CR MAX Professional Tablet
  • OBDII main cable
  • Power Brick
  • User manual
  • PC Connecting cable
  • Professional carry case
]]> Mon, 21 Jun 2021 09:42:27 +0000 <![CDATA[iCarsoft HD V3.0 ]]> iCarsoft HD V3.0 for Heavy Duty vehicles

Heavy Duty Diagnostic Tool HD V3.0 is the perfect tool for diagnosing and clearing heavy duty diagnostic trouble codes. It covers J1587, J1708 and J1939 protocols, for accessing Engine, Transmission, Brakes and more. It features a 2.8" full color LCD display and is ergonomic, highly portable and easy to use.

  • HD V3.0 is a powerful Code Reader for both heavy duty and car
  • It can work on all the vehicles which equipped with HD-OBD and OBDII
  • HD V3.0 for Heavy Duty Diagnostic Tool is the perfect tool for diagnosing and clearing heavy duty diagnostic trouble codes 
  • The Heavy Duty Diagnostic Tool HD V3.0 will work on ANY gas/diesel Heavy truck that complies with the Heavy Duty Standard Protocol
  • Almost all heavy trucks comply to this standard
  • For the heavy duty, It covers J1587, J1708 and J1939 protocols, for accessing Engine, Transmission, Brakes and more
  • For the car, it covers CAN, KWP,J1850 and ISO protocols, for accessing general OBDII powertrain system
  • It features a 2.8" full color LCD display and is ergonomic, highly portable and easy to use

ICARSOFT HD V3.0 OBDII FUNCTION FOR CARS

OBDII Function for all OBDII vehicles

Read Codes | Read generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) permanent and pending Diagnostic Trouble Codes.
Erase Codes | Erase generic and manufacturer specific Diagnostic Trouble Codes. 
Determine MIL | Turn off Check Engine Light (MIL) after clearing codes and reset monitors.
DataStream | Read live PCM DataStream. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
Freeze Frame Data | When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
I/M Readiness Test | Indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
O2 Sensor Test | This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
Evap System Test | The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
Battery test | Allows you getting the voltage of battery when the engine starts.
On-Board Monitoring | This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
Vehicle Information | Displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the vehicle. 
Comprehensive Help | Including OBD Parameter, Mode Explanations, DTC search & More.

OBDII Function supports most of the OBDII/EOBD test modes including CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
OBDII Function works on most of 2001 and later European OBDII compliant PETROL vehicles and most of 2004 and later European OBDII compliant DIESEL vehicles.

ICARSOFT HD V3.0 FUNCTIONS FOR HEAVY DUTY VEHICLES

  • Reads Engine, Transmission, ABS and Brakes
  • Read Fault Code (history code, active code, current code, pending code and  permanent code)
  • Read and clear heavy-duty DTCs, Gas or Diesel engine
  • I/M Readiness
  • Data Stream
  • View Freeze Frame
  • O2 sensor test
  • Enhanced Mode 6
  • On-board monitor test
  • Evaporative System Test
  • Vehicle Information
  • Support 6PIN, 9PIN, and 16PIN diagnostic connectors
  • Cover Class 4 (14,001 lbs) through class 8 (33,000 lbs and over) Heavy Duty Trucks
  • Support J1587, J1708 and J1939 protocols
  • Support CAN, KWP, J1850 and ISO protocols

Some Heavy Duty vehicles included are: 

ICARSOFT HD V3.0 CONTENTS

  • iCarsoft HD V3.0 scantool
  • OBDII cable
  • 6 PIN DLC adaptor
  • 9 PIN DLC adaptor
  • PC Connecting cable
  • Nylon Carry Case
]]> Thu, 17 Jun 2021 11:51:47 +0000